These are the most popular models. They have the latest firmware, months ahead of anyone. We not only sell new, not refurbished, BaoFeng radios but have taken the time to improve BaoFeng for everyone. When you buy from us, you are supporting new radios and advancements from the affordable radio movement. From testing BaoFeng radios and fixing bugs to preparing the user's guide - we pay attention to every single detail. We don't just market radios, but we believe in and use these radios! 


Model comparison chart

FREE CHIRP Programming Software - OSX, Linux, Windows


CHIRP software has many features, some of which are not available using the BaoFeng factory software, such as:

Uses the familiar RX frequency and ± Offset for repeaters

Allows 7 Character Alpha Tags (was only 6)

Upper & Lower Band Limits for TX on VHF & UHF

TX Inhibit for Scanner Only frequencies

Remembers the COM port setting between sessions

Remembers the last folder loaded from or saved to between sessions Supports serial ports up to COM256

Displays the actual Firmware release on the BaoFeng Radio


Download the Latest Build of CHIRP Here


CHIRP Guides and Helpful Resources:

Installation Tips:


CHIRP is supported on Windows 2000/XP/Vista/7/8.1/10


Windows XP users may need to follow the instructions hereif you have trouble starting CHIRP.



MacOS users must install the KK7DS Python runtime before the application will execute. This only needs to be installed once.


OS X support is limited to Intel architecture. PowerPC is not supported. is unsigned. With default security settings, you will need a special procedure to run it: Application Security in 10.9.


More useful tidbits can be found at MacOS Tips.



Most modern distributions should have almost everything required to run chirp. Make sure you have python-serial and python-lib-xml2 packages installed. For more information about using CHIRP under Linux, see the Running Under Linux page
















Return to LRS