Net/Rom Node Information for the Node Sysop


This is a series designed to help node operators understand some of the more arcane commands associated with the TheNet X-1JR4  node firmware that's in wide use throughout our state. It's a work currently in progress, so as of now, it is incomplete.

It's meant to be a plain-American-English way for node operators to learn about a very complex system. The original documentation is good, but was written by folks from other countries whose English usage is a tad different than ours. Some people might find that a little difficult to weed through, and that's why I wrote this series.

As each part is completed, it will appear in two places - here and in the Badger State Smoke Signals  . It'll appear here first, of course, as my publication deadline is on the 19th of each month.

If you have any specific questions you need help with, feel free to Mail me .
 
 

Here's the Table of Contents:


Part One  -  Introduction and the start of a discussion of the complex ACL Command

Part Two -  Continuing and concluding the discussion of the ACL Command

Part Three -  The ADC Command

Part Four -  The ALIAS and ARP Commands

Part Five -  A look at ARPTIMER and AUDIT

Part Six -  The BBS,  BBSALIAS, BRATE and BTEXT Commands

Part Seven -  Discussing CALIBRATE, CLOSEDOWN, CTEXT, DXCALIAS and DXCLUSTER

Part Eight  -  How to configure HOST, HOSTALIAS, INFO, and IPADDRESS

Part Nine  -  The IPBROADCAST and IPROUTE commands

Part Ten  -  Discussing the IPSTATS, L3MHEARD, and LINKS commands

Part 11 -  About the MANAGER, METER, MHEARD and MODE commands

Part 12  -  Covers the MTU, NODE and PARMS commands

Part 13  -  Dealing with the RESET,  ROUTES and STATS commands

Part 14  -  We finish the series with the SYSOP, TALK, UI and USERS commands.
 

TCP/IP Node Information for the Sysop - Will appear here soon as a mini-series.

Back to the WAPR Home Page