TX and RX MOD DR-M06T Alinco
RX 32-87Mhz    TX 42-70Mhz
1. Remove top and bottom covers.
2. Remove the main dial from the case
3. Remove the front plastic case.
4. Unscrew the 3 screws on the control unit and remove.
5. Locate  jumper locations (see diagram)
6. Place solder on the left 2 locations.
7. Reassemble the radio.
8. Reset the Microprocessor
 ( press and hold [FUNC] and turn on)

     Control unit backside
--------------------------------------
|         |        |                  |
|         |        |                  |
|         |        |                  |
---------------------------------------
              ^
              | \
              |   \
        --------------------------               
        |                        |
        |     [] [] [] []        |
        |     || ||              |
        |     [] [] [] []        |
        |     ^--^ place jumpers here
        |     :::::::::          |
        --------------------------

Expanded RX only Mod   RX 40-60  TX 50-54
1. Press and hold the [CALL] key and turn radio on
   Thats it.

Channel display MOD
1. Press and hold the [TOT] key and turn radio on.
the radio will no display channel numbers.