MSG#7 03/18/90  12:31:05 FROM KD6TH TO WA2ISE
SUBJECT:  - files\G7-ANT.MOD
R:900318/1708z 22164@KD6TH.NJ.USA [Wyckoff, NJ - 07481] Metro NY/NJ R:201744 
Date: 18 Mar 90 17:09:31 UTC (Sun)
From: kd6th@kd6th.nj.usa (reqfil)
Message-ID: <22164@KD6TH.NJ.USA>
Reply-To: kd6th@wa2ise
To: wa2ise@wa2ise
Subject:  - files\G7-ANT.MOD


---- Message #13301 filed by KD6TH , @ 0350z on 880504 -----

R:880327/1044z 16277@WB2HBZ [Kinnelon,NJ] P:201838 Z:07405 
R:880326/1748z 4776@WA2UMX [Saratoga Springs NY 12866] F:145.01/.05
R:880326/1735z 131@WA2PVV [Valatie, N.Y.] 145.05 Mhz.

IMPORTANT!  YOUR G-7 WILL HAVE A PROBLEM IF IT WAS MFG. BEFORE 23 MAR 88.
YOU MUST DRILL A DRAIN HOLE AT THE BOTTOM OF SECTION #5892 THAT IS THE ALUM
TUBI
NG JUST ABOVE THE LOWER PHASING COIL.  SPACE THE HOLE AS THE ONE AT THE
BOTTOM, 
JUST BELOW THE FIRST CLAMP.
MY G-7 LASTED ABT TWO MOS. AS A RPT ANT ON A MTN TOP BEFORE THE #5892 SECTION
FI
LLED WITH WATER, FROZE, AND PUSHED THE PRESS FIT PIECE AT THE BOTTOM OUT ABT A
1
/2 IN. AND PUSHED THE #5891 SECTION WITH THE REST OF THE ANT RIGHT OUT AND
SOME 
WHERE INTO THE 
OODS. ...


cmd:KD6TH-4>WI2W:
 Msg# TSF  Size Rd To     @ BBS  From