From n1ist@netcom.com Mon Nov 27 16:23:41 1995 Received: from amber.ccs.neu.edu (root@amber.ccs.neu.edu [129.10.111.100]) by kalypso.cybercom.net (8.6.12/8.6.12) with ESMTP id QAA27635 for ; Mon, 27 Nov 1995 16:23:04 -0500 Resent-From: n1ist@netcom.com Received: from nuhub.dac.neu.edu (nuhub.dac.neu.edu [129.10.1.6]) by amber.ccs.neu.edu (8.7.1/8.7.1) with ESMTP id QAA24960 for ; Mon, 27 Nov 1995 16:22:56 -0500 (EST) Resent-Date: Mon, 27 Nov 1995 16:22:56 -0500 (EST) Received: from neu.edu by neu.edu (PMDF V4.3-7 #11963) id <01HY57BPOFR69AOHYX@neu.edu>; Mon, 27 Nov 1995 16:25:06 EST Received: from netcom5.netcom.com by neu.edu (PMDF V4.3-7 #11963) id <01HY57CV7YHC9C2JS3@neu.edu>; Mon, 27 Nov 1995 16:26:04 EST Received: by netcom5.netcom.com (8.6.12/Netcom) id NAA00224; Mon, 27 Nov 1995 13:20:38 -0800 Date: Mon, 27 Nov 1995 13:20:38 -0800 From: n1ist@netcom.com (Michael L. Ardai) Subject: Icom mod Resent-to: scotte@ccs.neu.edu To: wy1z@neu.edu Resent-message-id: <01HY57BPQ1MC9AOHYX@neu.edu> Message-id: <199511272120.NAA00224@netcom5.netcom.com> X-Envelope-to: scotte@ccs.neu.edu X-VMS-To: IN%"wy1z@neu.edu" Content-transfer-encoding: 7BIT Status: RO X-Status: Xref: netcom.com rec.radio.amateur.equipment:22514 Path: netcom.com!ix.netcom.com!howland.reston.ans.net!newsfeed.internetmci.com!tank.news.pipex.net!pipex!demon!mail2news.demon.co.uk!g4oxy.demon.co.uk From: Larry Smith Newsgroups: rec.radio.amateur.equipment Subject: Re: New Icom IC-2350 Dualband Date: Sat, 25 Nov 1995 20:49:52 Organization: Myorganisation Lines: 12 Message-ID: <100810022wnr@g4oxy.demon.co.uk> References: <48g0r9$sce@pathway1.pathcom.com> Reply-To: Larry@g4oxy.demon.co.uk X-NNTP-Posting-Host: g4oxy.demon.co.uk X-Newsreader: Newswin Alpha 0.9 X-SMTP-Posting-Host: g4oxy.demon.co.uk [Sat, 25 Nov 95 21:41:44 GMT] X-SMTP-Posting-Host: post.demon.co.uk [Sat, 25 Nov 95 21:43:20 GMT] MODS FOR IC 2350 on logic board behind the front panel 1. remove D9 to expand vhf rx 2. remove d10 to expand uhf rx 3. cut w1 jumper wire to expand tx on all bands 4. AM selectable by holding [V/MHZ] button for 2 secs 5. Crossband repeat, set desired freqs press [VHF MAIN] [UHF MAIN]and [SET] simultaniously.To deactivate press [SET] for 2 secs There is also a remote access feature but its lengthy and I hate typing. Larry G4OXY