Newsgroups: rec.radio.amateur.homebrew
From: rwilcox@newton.cacky.com (Gary Wilcox)
Subject: Old GE UHF HT
X-Nntp-Posting-Host: m5.cacky.com
Keywords: HT Convert
Reply-To: rwilcox@newton.cacky.com (Gary Wilcox)
Organization: Commonwealth Aluminum
Date: Wed, 2 Aug 1995 13:14:55 GMT
All
I have aquired an old GE UHF HT. It doesnt have a model number
but it has the number 121A MP1 Series. It has 2 channels in the 450 Mhz
range. Can this be converted to Amateur use? Is it as simple as changing
crystals. How hard would it be to build a VFO to replace the crystal.
Gary Wilcox
KE4VUN
rwilcox@newton.cacky.com
From: Jim Devenport <jdevenport@lanl.gov>
Newsgroups: rec.radio.amateur.homebrew
Subject: Re: Old GE UHF HT
Date: 2 Aug 1995 16:06:35 GMT
Organization: Los Alamos National Laboratory
NNTP-Posting-Host: jdport.lanl.gov
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
X-Mailer: Mozilla 1.1N (Windows; I; 16bit)
To: rwilcox@newton.cacky.com
Yes, it is as easy as changing crystals.... but you will
have to align the transmitter and receiver RF &
oascillator/driver stages for best sensitivity and output.
If the original frequency is between 450 and 460 MHZ this
is likely all you'll have to do. If it is much above 460
MHZ you may well not be able to align it to specs without
modifying it by changing capacitance values in various
stages in which case you'll certainly want a repair manual
for it. Depending on what model GE it is, it may be one of
the series that employs a completely separate receiver and
transmitter, that might make it easily made into a low
power repeater.
VFO's of course are possible but very hard to keep stable
enough for satisfactory operation at these frequencies.
The necessary VFO output might be as low as 36 MHZ but
since it is multiplied in frequency by subsequent stages
whatever instability or error occurs is also multiplied by
a like amount.
--
*********** Jim Devenport WB5AOX **************
* PO Box 445, McIntosh NM 87032 *
* 505-832-1462 weekends, 667-1055 workdays *
* http://nis-www.lanl.gov/~jdport/ *
***********************************************