Band Switching via D/MR button on microphone:

	Effect: D/MR button on microphone performs band switching
	   rather than D/MR function.

	1-5) as in above mod
	6) Remove the jumper on Pad R4067
	7) skip above step 7
	8) continue with step 8 above

	Attributed: Tony Pelliccio, KD1NR system@garlic.sbs.com

Band Switching or Tone Burst via D/MR button on microphone (5200):

	Effect: change function of D/MR button on mike.

	This is based on information from Yaesu in Japan.

	The functions of pin 5 (the microphone button) can be altered
	by changing jumpers in the control head.  To find these
	jumpers, see the section on packet radio in the ordinary
	instruction book.

	                                  Control Head Jumper No
	Pin 5 Function                   Closed Jumper Marked By X
	                                1      2      3      4      5
	D/MR                            X
	Band                                   X
	1750Hz Tone Burst               X      X
	Main band Busy Out                            X
	Sub band  Busy Out                            X
	Call Channel                    X             X


	Main / Sub band busy out - When open SQL = 5 Volt DC
	                           Closed    SQL = 0 Volt DC
	[ed - I'm not sure what this means since I don't own a 5200]

	Attributed: John Newgas, G7LTQ jnewgas@cix.compulink.co.uk,
	            g7ltq@g7ltq.ampr.org