OUT OF BAND TX MOD FT1000
 -------------------------
 
 
 1. REMOVE POWER AND ANT.
 2. OPEN CASE LIKE EXPLAINED IN YOUR "OPERATING MANUAL".
 3. LOCATE FOUR SCREWS ATTACHING FROUNT PANEL AND REMOVE THE TOP SCREWS.
    LOOSEN THE BOTTOM SCREWS.
 4. TILT FROUNT PANEL FORWARD.
 5. ON THE LEFT SIDE OF THE RADIO, REMOVE THE PLUG FROM POWER SUPPLY TO
    THE FROUNT PANEL. (GRAY AND WHITE WIRES.)
 6. LOCATE THE JUMPER POSITION 3 ON CONTROL BOARD.
 7. CHANGE THE JUMPER STATUS IN POSITION 3.
 8. REASSEMBLE RADIO.
 9. RESET CPU (see your OPERATING MANUAL).
 
 
 73's de Phil
======================================================================
Note: I haven't tried or verified this, proceed at your own risk, and
do not transmit outside of legal bands! 


ÿ