===============================================================================


                          TS 950 Simple Modifications
                         xxxxxxxxxxxxxxxxxxxxxxxxxxxxx

  Kenwood TS 950  Power On Funktions
  Please notice that all functions only work if you switch off radio first.
  Please  push the  named buttoms  to start  function when  switching  on  the
radio:,
  JSUB  : SUB  receiver capable  of scanning,to  SUB-scan push  and  hold  the
SUB-key
  and press than the scan keys oENT : Set up ch. 90-99 as amateur band vfos
  160-10 m band possible.each memory vfo will accept direct frequencie entry.
  (like ICOM band stack memory)s t5+M-VFO:  set  up  ch.80-89  to  accept  any
memory
  datas oRX/A: Turn ON/OFF SUB receiver marker on SM 230 Monitor in 100kHz/
  250kHz and 25kHz sweep mode. amIC+COMP: stop transmit if Ic exceeds 1,7 A.
  Power output limited to 10 Wattire8.83 + RIT : Both 8.83 MHz and 455 kHz IF
  Filters are selectable on transmit.Each memory channel is also capable of
  storing this setting.recGeneal Coverage TX : cutting D 17 provides genearl
  coverage transmits oMemory protect: Cutting D 129 on control unit protects
  memory  contents from  beeing erased.  anWrite protect  : Cutting  D  18  on
Control
  Unit write protects all memory channels. Po73 and good DX with the "ULTIMATE
  SIGNAL " HI HI HI, , , 
                       
================================================================