IC-W32                    CROSS-BAND  REPEATER


Hello artists.

This article shows how to operate with the IC-W32 in cross-band repeater
function.

1.- Set  2m and  70cm work frequencys in the correspondent display.

2.- Lock the trnsceiver (displays show a key)

3.- Turn        off the transceiver

4.- Push and hold  SQL button + MAIN button + BAND button  and then TURN ON the
transceiver

In this moment the transceiver is a cross-band repeater (the key, at the right
of the display flicker).

DISCONNECT REPEATER.

For disconnect repeater function only , UNLOCKED the transceiver when not
signals presents.

73! and good experiment.



** Hasta la proxima !! **