Model and Serial Number : See Below
Power in watts : 100
Band : VHF (146 - 174 Mcs.)
Note about the photos below :
They are from the internet.
I have no good way of photographing the radios.










My Models and Serial Numbers are :
My ID
Number
Model
Number
Serial
Number
Number
of Channels
201312-001
 T73XTA7TA7BK
 776TAJ1661
 99
201312-002
 T73XTA7TA7BK 776TWL0677
 99
201312-003
 T73XTA7DA2BK
 776ASA0568
 16
201312-004
 T73XTA7DA2BK 776AQU1602
 16
201312-005
 T73XTA7DA2BK 776ASL1517
 16





Control Heads I Have

The "Clam Shell" head
Has two zones of 8 modes each.

The A7 Head.

I think I can interface with it for remote
controlling the up/Down modes.

I did notice that the front circuit board is the same as
a Syntor X's control head.

When tested the pads where the DTMF numbers are suposed to be, I did get the MaraTrac to send DTMF tones. Next test is to get a Syntor X head and remove the front face plate with the DTMF buttons and try it for usage. If successful, I  will show how later on here and post to Repeater Builder group..