Radiall/Larsen offers a full selection of quality cables in popular RG174,
RG58 and RG8 sizes. Cables are produced to exact specifications by
recognized suppliers including Belden.
Lower loss means better reception and performance. Radiall/Larsen is
continually searching for the best cable and connector designs that will
yield superior performance at a reasonable price. Why cable and
connectors? Because Radiall/Larsen believes that to truly design the best
antenna system, all components must “perform in unison”. This includes
the whip, coil, base, mounting hardware, cables, and connectors.
In this section, you will find a wide array of cables and connectors that
will suit your needs no matter what your specific application might be.
Please be sure to consider such parameters as acceptable loss, noise, and
connector type when making your selection.
RG-174
| Small
Diameter Coax |
RG-174
is the industry standard for applications requiring a
small diameter, highly flexible coax. Frequently used in
mobile mag mount applications. Subject to higher losses at
higher frequencies. Good performance for environmental
variations but lower in overall ruggedness.
|
|
RG-58A/U
Radiall/Larsen
CX standard Coax |
| The
industry standard in quality, value priced coax. Stranded
center conductor offers good flexibility and long-life
under most conditions. Not typically recommended for
applications above 512 MHz due to higher losses. Uses
standard RG58 connectors. |
|
|
RG-58A/U
| “Digi-Shield”™
Low Loss Braided Center |
| This
A/U Coax employs two shields, consisting of a full
aluminum/mylar wrap covered by a braid. This combination
of shields, plus low-loss dielectric material and stranded
center conductor makes an excellent choice for mobile
applications. Performance features include low-loss and
high flexibility. Uses standard RG58 connectors. |
|
RG-58U
| Low
Loss Dual Shield w/ Solid Center Conductor (UD) |
| This
is Larsen’s premium coax for 800 & 900 MHz
applications. The solid center conductor, (20 AWG) is easy
to use with all connectors. Digital applications benefit
from the 100% Duofoil aluminum shield. The shield is not
glued to the dielectric making it easier to peel back for
connector installation. The braid is 95% coverage. This
cable is standard for most mounting kits over 800 MHz and
can be special ordered with other frequencies. Uses
standard RG58 connectors. |
|
RG-58A/U
| Dual
Shield Coax for High Temperature Applications |
| By
adding an additional Teflon shield, this cable design
(based on the UD coax construction) high excellent
resistance to heat and very high mechanical durability.
The solid center conductor, (20 AWG) is easy to use with
all connectors. Digital applications benefit from the 100%
Duofoil aluminum shield. The shield is not glued to the
dielectric making it easier to peel back for connector
installation. The braid is 95% coverage. Uses standard
RG58 connectors. |
|
Radiall/Larsen
SMA Connectors are semi-precision, sub-miniature, high frequency
connectors that offer reliable broadband performance DC to 18 GHz
with low reflection and constant 50-ohm impedance. Primary
features include high mechanical strength and durability, and low
VSWR.
Radiall/Larsen offers SMA connectors for RG58 and RG174 coaxial
cable types. |
| Electrical
Specifications |
| Impedance |
50
ohm |
| Frequency
Range |
Semi-rigid
cable for .141" or .085 OD copper jacket: 0-18 GHz
Flexible cable: 0-12.4 GHz
|
| Voltage
Rating |
RG-58:
500V peak
RG-174: 375V peak
|
| Dielectric
withstanding voltage |
RG-58
cable group: 1000V RMS |
| VSWR-straight
Connectors *f in GHz |
RG-174
cable group: 1.15+.02f
RG-58 cable group: 1.15+.01f
|
| Contact
resistance |
Center:
2.0 milliohms
Body: 2.0 milliohms
Braid To body: 0.5 milliohms
|
| Insulation
resistance |
5000
Megohms
|
| RF
leakage |
-90
db min. at 2-3 GHz
|
| Insertion
loss |
db
max. = .06 freq. GHz.
Test frequency @6.0GHz
|
| Material
Specifications |
| Parts
Name |
MIL
Standard
|
| Body,
coupling nut, other metal parts |
Brass
per QQ-B-626 finish: nickel or gold per requirement
|
| Contacts |
Male:
Brass per QQ-B-626
Female: Beryllium copper per QQ-C-530 heat treated per
MIL-H-7199
|
| Finish |
.00005"
min gold plated per MIL-G-45204 type 1,
Grade C
|
| Insulator |
PTFE
|
| Gasket |
Silicone
rubber
|
| Crimp
Ferrule |
Seamless
copper tubing alloy
|
Radiall/Larsen
offers a full line of 50 ohm BNC connectors for RG58 and RG174
type coax. Each is made to the highest quality standards with
premium materials such as brass, copper, silver and gold plating,
Delrin and Teflon®.
|
| Electrical
Specifications |
| Impedance |
50
ohm |
| Frequency
Range |
0-4
GHz
|
| Working
Voltage |
500V
rms
|
| Dielectric
withstanding voltage |
1500V
rms
|
| VSWR |
1.3
max 0-4 Ghz |
| Contact
resistance |
Center:
1.5 milliohms Outer contact 1.0 milliohm
|
| Insulation
resistance |
5000
Megohms
|
| Material
Specifications |
| Parts
Name |
Material
|
Finish |
| Center
Contact: Male |
Brass |
Gold,
or Silver Plated |
| Center
Contact: Female |
Phosphor
Bronze (nominal) |
Gold
or Silver Plated |
| Metals
parts |
Brass,
Die Cast |
Nickel |
| Insulators |
Teflon,
Delrin |
NA
|
| Clamp
Gasket |
Silicone
rubber, Synthetic rubber |
NA
|
| Crimp
Ferrule |
Annealed
copper, Brass |
Nickel
|
Radiall/Larsen
offers a full line of 50 ohm TNC connectors for RG58 and RG174
type coax. Each is made to the highest quality standards with
premium materials such as brass, copper, silver and gold plating,
Delrin and Teflon®. |
| Electrical
Specifications |
| Impedance |
50
ohm |
| Frequency
Range |
0-11
GHz
|
| Working
Voltage |
500V
rms
|
| Dielectric
withstanding voltage |
1500V
rms
|
| VSWR |
1.3
max 0-11 Ghz |
| Contact
resistance |
Center:
1.5 milliohms Outer contact 0.2 milliohm
|
| Insulation
resistance |
5000
Megohms
|
| Material
Specifications |
| Parts
Name |
Material
|
Finish |
| Center
Contact: Male |
Brass |
Gold,
or Silver Plated |
| Center
Contact: Female |
Phosphor
Bronze (nominal)
or Beryllium |
Gold
or Silver Plated |
| Metals
parts |
Brass,
Die Cast |
Nickel |
| Insulators |
Teflon,
Delrin |
NA
|
| Clamp
Gasket |
Silicone
rubber, Synthetic rubber |
NA
|
| Crimp
Ferrule |
Annealed
copper, Brass |
Nickel
|
Radiall/Larsen N connectors are designed for use in all systems
where excellent RF and mechanical performance is critical
regardless of frequency. N connectors with screw coupling are
fully interchangeable with those made to the
MIL-C-39012.
Radiall/Larsen provides 50ohm N connectors for RG58, Rgi74 and RG8
style coaxial cable. |
| Electrical
Specifications |
| Impedance |
50
ohm |
| Frequency
Range |
0-11
GHz
|
| Voltage
Rating |
1500
Volts rms
|
| Dielectric
withstanding voltage |
2500
Volts rms
|
| VSWR |
1.3
max 0-11 Ghz |
| Contact
resistance |
Centercontact
1.5 milliohms Outer contact 0.2 milliohm
|
| Insulation
resistance |
5000
Megohms (min)
|
| Material
Specifications |
| Parts
Name |
Material
|
Finish |
| Center
Contact: Male |
Brass |
Gold,
or Silver Plated |
| Center
Contact: Female |
Phosphor
Bronze (nominal)
or Beryllium |
Gold
or Silver Plated |
| Metals
parts |
Brass,
Die Cast |
Nickel |
| Insulators |
Teflon,
Delrin
BPT polyester |
NA
|
| Clamp
Gasket |
Silicone
rubber, Synthetic rubber |
NA
|
| Crimp
Ferrule |
Annealed
copper, Brass |
Nickel
|
Radiall/Larsen offers a complete selection of the popular,
economical UHF/Mini-UHF connectors. These connectors are ideal for
applications where impedance mating is not required. Models are
available for RG-58 and RG-174 coaxial cable types.
|
| Electrical
Specifications |
| Impedance |
50
ohm nominal |
| Frequency
Range |
0-2.5
GHz
|
| Working
Voltage |
335V
rms
|
| Dielectric
withstanding voltage |
1000V
rms
|
| VSWR |
1.25
max 0-2.5 Ghz |
| Insulation
resistance |
5000
Megohms (min)
|
| Mini
UHF Series |
| Impedance |
Non-constant |
|
| Frequency
Range |
0-500
MHz |
|
| Voltage
Rating |
500
Volts peak |
|
| Material
Specifications |
| Parts
Name |
Material
|
Finish |
| Center
Contact: Male |
Brass |
Gold,
or Silver Plated |
| Center
Contact: Female |
Phosphor
Bronze (nominal) |
Gold
or Silver Plated |
| Metals
parts |
Brass,
Die Cast |
Nickel |
| Insulators |
Teflon,
Delrin |
NA
|
| Clamp
Gasket |
Silicone
rubber, Synthetic rubber |
NA
|
| Crimp
Ferrule |
Annealed
copper, Brass |
Nickel
|
Radiall/Larsen's HyPer Connect system utilizes the FME universal
connector as its foundation. The FME is compact for easy cable
runs, with a loss rating of just 0.1dB. Adapters available in BNC,
Mini UHF, N, PL-259, SMA Male and Female and TNC versions. The
HyPer Connect system is designed for RG-58 and RG-174 coaxial
cable types.
|
| Electrical
Specifications |
| Impedance |
50
ohm nominal |
| Frequency
Range |
0-1.8GHz
|
| Working
Voltage |
500
Volts rms
|
| VSWR |
1.3
max. z |
| Insulation
resistance |
5000
Megohms (min)
|
| Material
Specifications |
| Parts
Name |
Material
|
Finish |
| Center
Contact: Male |
Brass |
Gold,
or Silver Plated |
| Center
Contact: Female |
Phosphor
Bronze (nominal)
Beryllium Copper |
Gold
or Silver Plated |
| Metals
parts |
Brass,
Die Cast |
Nickel |
| Insulators |
Teflon,
Delrin |
NA
|
| Crimp
Ferrule |
Annealed
copper, Brass |
Nickel
|
Availability and Price of antennas
and accessories is subject to change without prior notice.
|
