I. Parts List 

The intention is to use general good practice high-power rocket techniques and materials throughout. Attention being paid to strength and redundancy.  All metal hardware is stainless steel unless otherwise noted. 


Parts list 
4" bt filament wound fiberglass 48"   1  nose cone 3.90"  ogive 3.2:1  1
4" bt filament wound fiberglass 36"   2  AeroPack Motor Retainer 76mm   1
3" mt filament wound fiberglass 36"   1  Nomex chute protector   2
4" ct  7" filament wound fiberglass   3  Nomex sleeves   2
Fins 9" x 5"x 4" G-10 .375 thick  3  main chute   1
4" bt centering ring to 54mm   2  drogue chute   1
4" bt centering ring to 76mm   14  fiberglass cloth and tape yards  2
4" bt bulkhead 4hole  10  1" tubular nylon/foot   60'
4" bt bulkhead  8 ! /4" all-thread (Ft) w/washers & nuts   6'
g-10 stock.093 (square foot)   1  Rod Eyebolts w/washers & nuts  4
BlackSky rail guides  3  epoxy 20 min set w/fillers (west sys,)  gallons
4" ct bulkhead aluminum 1/8"  4  Sandpaper, paint primer, etc, etc.  bunches
4" ct bulkhead   4  carbon fiber cloth   yards


Back      Next