IC-706MKIIG

IC-706MKIIG SPECIFICATIONS

GENERAL

• Frequency Coverage:

Receive

0.030 - 199.999 MHz^*, 400 - 470 MHz^*

Transmit

1.8 - 1.999 MHz^*

3.5 - 3.999 MHz^*

7.0 - 7.300 MHz^*

10.1 - 10.150 MHz

14.0 - 14.350 MHz

18.068 - 18.168 MHz

21.0 - 21.450 MHz

24.89 - 24.990 MHz

28.0 - 29.700 MHz

50.0 - 54.000 MHz^*

144.0 - 146.000 MHz^*

430.0 - 440.000 MHz^*

* Varies according to version

• Mode: USB, LSB, CW, RTTY (FSK), AM, FM, WFM (Rx only)
• Number of memory channels. : 107 (99 regular, 6 scan edges, 2 call channels)
• Antenna connector : SO-239x2 (for HF/50 MHz and 144/430 MHz)/50
• Power supply requirement: 13.8 V ± 15% (negative ground)
• Frequency stability: Less than ± 7ppm from 1 min. to 60 min. after power ON. After that rate of stability less than ± 1 ppm/hr. at +25 ^°C (+77^°F). Temperature fluctuations 0^°C to +50^°C (+32^°F to +122^°F) less than ±5 ppm.
• Current drain: Transmit max. power 20 A; Receive standby 1.8 A, max. audio 2.0 A
• Usable temperature range : -10^°C to 60^°C (14^°F to140^°F)
• Dimensions (projections not included):
• 167(W) X 58(H) X 200(D) mm
• 6-9/16(W) X 2-9/32(H) X 7-7/8(D) in
• Weight: 2.45 kg (5 lb 6 oz)
• CI-V connector: 2 conductor, 3.5 (d) mm (1/8")
• ACC connector: 13 pin

Transmitter

• Output power:

	SSB/CW/RTTY/FM	AM
HF/50 MHz	5 - 100 W	2 - 40 W
144 MHz	2.5 - 50 W	2 - 20 W
440 MHz	2 - 20 W	2 - 8 W

• Modulation system

SSB	Balanced modulation
AM	Low level modulation
FM	Variable reactance modulation

• Spurious emissions: Less than -60 dB (below 47.5 MHz: -50dB; 47.5 - 50 MHz: -50 to -60 dB; above 50 MHz: -60 dB)
• Carrier suppression: More than 40 dB
• Unwanted sideband: More than 50 dB
• Microphone connector: 8 pin modular jack (600ohm  KEY connector: 3-conductor 6.35 (d) mm (1/4")
• RTTY connector: 3-conductor 3.5 (d) mm (1/8")

Receiver

• Receive system:
• SSB/CW/AM/WFM: Double superheterodyne
• FM : Triple superheterodyne
• Intermediate frequencies

 

	1st	2nd	3rd
SSB/AM-N/FM	69.0115 MHz	9.0115 MHz	0.455 kHz (FM only)
CW	69.0106	9.0106	-
RTTY	69.0105 MHz	9.0105 MHz	-
AM/FM-N	69.0100 MHz	9.0100 MHz	0.455 kHz (FM only)
WFM	70.7000 MHz	10.7000 MHz	-


 
• Receive sensitivity (preamp on, except 4- - 4.5 and 8 - 9 MHz)

 

	SSB/CW 10 dB S/N	AM 10 dB S/N	FM 12 dB SINAD	WFM 12 dB SINAD
0.5 - 1.8 MHz	-	13 µV	-	-
1.8 - 28 MHz	0.15 µV	2.0 µV	-	-
28 - 29.7 MHz	0.15 µV	2.0 µV	0.5 µV	-
50 MHz band	0.12 µV	1.0 µV	0.25 µV
76 - 108 MHz	-	-	-	10.0 µV
144/440 MHz band	0.11 µV	1.0 µV	0.18 µV	-


 
• Squelch Sensitivity (threshold)

 

SSB	Less than 5.6 µV
FM	Less than 0.3 µV


 
• Selectivity (normal setting)

 

SSB, CW, RTTY	More than 2.4 kHz/- 6 dB
	Less than 4.8 kHz/ -60 dB
AM/FM-N	More than 8.0 kHz/-6 dB
	Less than 30 kHz/-36 dB
FM	More than 12 kHz/-6 dB
	Less than 30 kHz/-60 dB


 
• Spurious and image rejection ratio:
• SSB/CW/AM - More than 70 dB
• Audio output power (at 13.8 V DC): More than 2.0 W at 10% distortion with an 8-ohm load
• RIT variable range +/-9.99 kHz
• PHONES connector: 3-conductor, 3.5 (d) mm (1/8")/8 ohm
• EXT SP connector: 2-conductor, 3.5 (d) mm (1/8")/8 ohm

All stated specifications are subject to change without notice or obligation.

IC-706MKIIG SUPPLIED ACCESSORIES

• Hand microphone
• DC power cable
• Spare fuses
• RTTY key plug
• Electronic keyer plug
• ACC cable

IC-706MKIIG OPTIONS

• IC-PW1 HF + 50 MHz 1 kW HF LINEAR AMPLIFIER

Covers all HF and 50 MHz bands, provides clean, stable 1 kW output. Automatic antenna tuner and compact detachable controller are standard. 2 exciter inputs are available. (An optional OPC-599 is required.)
• AH-2b HF ANTENNA ELEMENT

For mobile operation with the AH-4. All bands between 7 - 54 MHz can be matched.
• AH-4 HF+50 MHz AUTOMATIC ANTENNA TUNER

Covers 3.5 - 54 MHz with a 7 m (23 ft) or longer wire antenna.
• AT-180 HF +50 MHz AUTOMATIC ANTENNA TUNER

Style and size are matched to the IC-706MKIIG.
• PS-85 DC POWER SUPPLY

Output: 13.8 V DC (20 A max.).
• MB-62 MOBILE MOUNTING BRACKET

For mounting the IC-706MKIIG main unit or the AT-180
• MB-63 MOBILE MOUNTING BRACKET

For mounting the detached front panel.
• MB-65 MOUNTING BASE

For mounting the detached front panel in a vehicle. The MB-63 is required.
• MB-72 CARRYING HANDLE

Convenient for DX'peditions, operating in the field, etc.
• OPC-581/OPC-587 SEPARATION CABLES

Provides separate operation. OPC-581: 3.5 m (11 ft); OPC-587: 5 m (16 ft)
• SM-8 DESKTOP MICROPHONE

Equipped with 2 connection cables. (an optional OPC-599 is required.)
• SM-20 DESKTOP MICROPHONE

High quality desktop microphone. (an optional OPC-599 is required.)
• SP-7 EXTERNAL SPEAKER

Compact speaker for base station use.
• SP-10 EXTERNAL SPEAKER

Heavy duty speaker for mobile use.
• SP-12 EXTERNAL SPEAKER

Thin type speaker for mobile use.
• UT-106: Provides AF DSP functions such as noise reduction and auto notch. Built in to some versions [like USA and Canada].
• FL-100: 500 Hz/-6 dB (CW/RTTY nar.)
• FL-101: 250 Hz/-6 dB (CW nar.)
• FL-103: 2.8 kHz/-6 dB (SSB wide)
• FL-223: 1.9 kHz/-6 dB (SSB nar)
• FL-232: 350 Hz/-6 dB (RTTY/CW nar.)
• CR-282 HIGH STABILITY CRYSTAL UNIT
• CT-16 SATELLITE INTERFACE UNIT
• CT-17 CI-V LEVEL CONVERTER
• UT-102 VOICE SYNTHESIZER UNIT
• OPC-599 MODULAR 8-PIN CABLE ADAPTER
• OPC-598 ACC 13 PIN CABLE FOR AT-180
• OPC-599 ACC 13 PIN CABLE ADAPTER
• OPC-742 ACC 13 PIN CABLE

Return to Previous