POLAR2 program readme - version 2.3


Command Line:

POLAR /COMn /BW /COLOR /DSnn

   /COMn is com port number, 1-4
   /BW for monochrome, or /COLOR for color
   /DSnn for dead space percentage, must be two digits

   Defaults are  /COM1 /COLOR /DS10



Keystroke Definitions:


C - Clear Screen, redraw all
Z - Reset all parameters to default values and redraw
P - Toggle persistence mode on and off
M - Switch waterfall mode from off, antenna or bearing
X - Exit program

Q - Decrease lower S-Meter cutoff by 10
W - Decrease lower S-Meter cutoff by 1
E - Increase lower S-Meter cutoff by 1
R - Increase lower S-Meter cutoff by 10
A - Decrease upper S-Meter cutoff by 10
S - Decrease upper S-Meter cutoff by 1
D - Increase upper S-Meter cutoff by 1
F - Increase upper S-Meter cutoff by 10

K - Decrease persistence by 10
L - Increase persistence by 10


Y - Manually move antenna direction by 1 degree
U - Manually move antenna direction by -1 degree

I - Manually increase the S-Meter by 1 unit
O - Manually decrease the S-Meter by 1 unit

H - Manually move car direction by 1 degree
J - Manually move car direction by -1 degree

Shift F1 through Shift F10 - Saves settings in F##
F1 through F10 - Restores settings in F##