POLAR program readme - version 1.7


Command Line:

POLAR /COMn /BW /COLOR /DSnn

   /COMn is com port number, 1-4
   /BW for monochrome, or /COLOR for color
   /DSnn for dead space percentage, must be two digits

   Defaults are  /COM1 /COLOR /DS10



Keystroke Definitions:


C - Clear Screen, redraw all
Z - Reset all parameters to default values and redraw
P - Toggle persistence mode on and off
X - Exit program

Q - Decrease lower S-Meter cutoff by 10
W - Decrease lower S-Meter cutoff by 1
E - Increase lower S-Meter cutoff by 1
R - Increase lower S-Meter cutoff by 10
A - Decrease upper S-Meter cutoff by 10
S - Decrease upper S-Meter cutoff by 1
D - Increase upper S-Meter cutoff by 1
F - Increase upper S-Meter cutoff by 10

K - Decrease persistence by 12
L - Increase persistence by 12