K3FS Station, QSL Policy, And Log Search
Operating Conditions
- HF/VHF/UHF : Yaesu FT-857 HF/VHF/UHF Radio
- VHF : Radio Shack HTX-242 2 Meter Mobile
- UHF : Alinco DR-430TQ UHF 70cm Mobile
- Duplexer : Diamond Duplexer
- Tuner : LDG AT-11MP Auto Tuner
- Coax : Times Microwave LMR 400
- HF Antenna : Solarcon A 99, DX Engineering 43 Ft Vertical (MBVE 5)
- VHF/UHF Antenna : Dual Band UHF/VHF Base Antenna and 10 Meter Discone.
- Scanner : Radio Shack PRO-2006
- Scanner Antenna : Opek - TS10
- Scanner Pre-Amp : GRE Super Amplifier.
- Computer :Dell Optiplex 780 Dual Core 3Ghz 4GB RAM
- Software : Ham Radio Deluxe
- SDR : SDR Play RSP 1, Terratec TStick, RTL SDR
- SDR Software : SDRuno
- 6 Meter/220/2Meter/440 : Yaesu VX-7R Quad Band HT
- Portable Scanners : Uniden BCD 396XT, Radio Shack Pro-96, Radio Shack Pro-92.
- Base Scanners : GRE PSR 200, And Radio Shack Pro 2096
- VHF/UHF : Yaesu FT-8800R Dual Band Mobile
- VHF/UHF Antenna : Dual Band Antenna
K3FS QSL Policy :
- LOTW - Preferred method. All contacts will be uploaded within a few days. Normally logs are uploaded at the end of operating for the day.
- EQSL - Usually automatic upload after the contact, when QSO is logged. I have a temperamental WiFi connection. and this may cause QSO's to be uploaded later.
- HRD - Usually automatic upload after the contact, when QSO is logged. I have a temperamental WiFi connection. and this may cause QSO's to be uploaded later.
- Club Log - Will be uploaded automaticaly, if not after I complete operations for that day
- ARRL Bureau - I do receive cards via the bureau. Cards received via bureau will be returned via the bureau
- Direct - I will accept cards sent directly. Please include a self addressed envelope. DX cards, no money or IRC is needed. If you would like to include $1 or 1IRC to cover will be appreciated. US cards no SASE needed.
- SWL Reports : All SWL reports will be answered as per above policy.
543 Glen Shannon Dr.
Pittsburgh, PA 15234
Check my Club Log. If you are in the log, and would like a QSL email the date, time, freq, and mode for the QSO to [email protected]. For DX QSL will likely be sent via bureau. For US QSL will be sent directly.
If you have not received a QSL please send an email to [email protected]