#!/bin/bash
# astled script by Kyle Yoksh, K0KN 8/2013, last revised 11/25/2014
#
# This script uses the Scroll Lock LED or MWI to indicate PTT for your node
#
# Add the following into your events stanza in rpt.conf (without the # of course) 
#
# [events1234]
#       ; Use scroll lock LED to indicate node activity
#       /home/kyle/astled 1 = s|t|RPT_TXKEYED
#       /home/kyle/astled 0 = s|f|RPT_TXKEYED

YOURPATH="/home/kyle"

if [ "$1" == "" ] ; then
echo "Usage: astled [0 1]" ; exit
fi

# During node activity, do this:
if [ "$1" == "1" ] ; then
# turn MWI on for ext 504
"$YOURPATH"/mwi_on 504
#
# turn on scroll lock on consoles 1 & 9 
setleds -L +scroll < /dev/tty1
setleds -L +scroll < /dev/tty9
#
# also turn on parallel port pin 7 (LED indicator)
"$YOURPATH"/aux 2211 7 1 
#
# also turn on Velleman USB board output 1 
# "$YOURPATH"/k8055/k8055 -p:0 -d:001
exit
fi

# During no node activity, do this:
if [ "$1" == "0" ] ; then
# Turn off MWI for ext 504
"$YOURPATH"/mwi_off 504
#
# turn off scroll lock on consoles 1 & 9 
setleds -L -scroll < /dev/tty1
setleds -L -scroll < /dev/tty9
#
# also turn off parallel port pin 7 (LED indicator)
"$YOURPATH"/aux 2211 7 0
#
# also turn off Velleman USB board output 1
# "$YOURPATH"/k8055/k8055 -p:0 -d:000
exit
fi

# Done!
exit 0