KENWOOD TS-430S

                  GENERAL COVERANGE IN TRANSMISSION


1) On the the bottom board of the transceicer find the RF-UNIT (X44-1510-11).

2) Near the two plugs numbered 9 and 10 , you will see two diodes called
   D 39 and D 40.

3) Simply cut the two diodes D 39 and D 40 on the RF-UNIT.

....And now, INCREDIBLE !..it can transmit continusly from 1,6 to 30 Mhz !!!!


------------------------------------------------------

                        ****  KENWOOD    TS - 430 S  ****

                           EXPANDED  RF   M/C

         1. Disconnect the Power and antenna.

         2. Remove the top and bottom covers from the radio.

         3. Locate Connector # 10 on the RF circuit board.

         4. Cut the two wires that are NOT GREEN . Leave the Green Wire.

         5. Reassemble the radio.

         6. RESET the CPU.

                          ***********************

CAUTION : These Modifications have not been tested. The Author , Publisher 
and all other parties takes NO responsibility or Liability for any damage or 
violation resulting from these Modifications . Performing any modification may be a Violation of FCC Rules and will void the Warranty of the radio. USE of 
any Modified radio may be a violation of FCC Rules. If you have any doubts,

                      DO NOT PERFORM THIS MODIFICATION