AGW PACKET ENGINE + RXCLUSTER
x PACKET 1200 (under Windows) with Audio Card

Two words abou rxcluster: it's a nice software that allow you monitoring packet cluster and dx-spot without be connected; it's the best software for SWL but also hams can find it useful; ther's a DXCC database that you can update with your own qso-qsl so that you will be informed only about needed country (mode-band setting allowed); there is also a iota database;

• Software needed:
  WINSOCK Ver.2 for Win95 (WS2SETUP.EXE);
  AGWPE (AGWPE.ZIP); (AGW PACKET ENGINE 's Home Page on http://www.raag.org/sv2agw/ );
  DRIVER (DRIVERS.ZIP, SYSTEM.ZIP);
  RXCLUSTER ver. 7.2a (RXCLUS72.ZIP, UPD72A.ZIP); (RXCLUSTER 's Home Page on http://rchalmas.users.ch/rxclus/ ).
• Install and run AGW PACKET ENGINE as described in "HOW TO INSTALL AGW PACKET ENGINE" page;
• Install and run RXCLUSTER; in the OPTION window select SERIAL than AGW;
  under LOCAL set your call and UTC time (make it correctly, if not you can have troubles using the "don't see old spot" option!).
  Now you can see the traffic on the monitor window..enjoy!
• You can run also other packet software (such as TSHWIN, WINPACK ecc.) at the same time.
  

FOR ANY PROBLEM SEE TROUBLES PAGE

73 de iz7ath, Talino