FLEXNET + TSTHOST
x PACKET 1200 (under DOS) with AUDIO CARD

The use of TSTHOST with a simple Audio Card is really a great thing!
If previous tests were successful you can go on:

• Software needed:
  FLEXNET (PCF.LZH)(DOWNLOAD PAGE OF FLEXNET);
  SM AUDIO DRIVER by Thomas Sailer, HB9JNX (SM.LZH o PSADRVR.LZH);
  HOSTMODE EMULATOR (TFEMU.LZH);
  TSTHOST VER. 1.43C (TSTH143C.ZIP);
  Software to extract compressed files (LHA.EXE);

• I suppose you already know TSTHOST or, at least, you know how to make a directory and install it (if possible, in C:\TSTHOST);

• Install FLEXNET as explaned in "HOW TO INSTALL FLEXNET UNDER DOS" page;

• add the following lines to FLEX95.BAT
  lh tfemu -i:0xfd /dm
  c:\tsthost\tsthost /t /i253 /k2
  (be sure the path of tsthost is right)
  or download the file FLEXTST.BAT, wich is similar to FLEX95.BAT with the 2 last lines added.
  (I used /K2 just because on my PC there wasn't enough memory and TSTHOST didn't start, so I used only 2 channels);

• Reset your PC; at the DOS prompt call the file FLEXTST and make sure there are not error messages;
  

• Now enjoy receiving packet signales (and also transmitting); if you can not see any traffic, try with the command "AX MONITOR IUSC" in tsthost.
  

FOR ANY PROBLEM SEE TROUBLES PAGE

73 de iz7ath, Talino