TFPCX + TSTHOST
+ MODEM BAYCOM
Software needed:
TSTHOST ver.1.43c (TSTH143C.ZIP); (TSTHOST 's
Home Page on http://www.r-j.it/servizi/hp/ik1gkj/ik1gkj.htm);
TFPCX (by DG0FT);
Use the following Batch file ( 1200 Baud):
cd\tsthost
loadhigh tfpcx -pcom1 -b1200
tsthost /t /i253 /K3 /NOXMS /U200
tfpcx -pcom1 -u
1 (directory where is TSTHOST and TFPCX);
2 (load TFPXC with modem on COM1 and BAUD
RATE 1200);
3 (load TSTHOST using TFPCX o TFPCR driver,
interrupt 253 (TFPCX), only 3 channels, no XMS and set unproto list at 200);
4 (exit unloading TFPCX);
If you use 300
Baud use the following file:
cd\tsthost
loadhigh tfpcx -pcom1 -b300
tsthost /t /i253 /K3
tfpcx -u
(You only need to put -B300 instead of
-B1200; I Think it's ok also for 2400 ecc.).
All done, of course, under DOS!
73 de iz7ath, Talino