INDOOR MULTBAND DIPOLE FOR 40M - 10M


 

Indoor multiband dipole 20m -10m (to scale), 2003


New (2005) indoor multiband dipole 40m -10m (not to scale)
15m dipole replaced by 40m/15m dipole, see below


Antenna wires connected in parallel to HyGain BN-86 Balun


Antenna wires attached to roofspars
Spacing between wires = 0.2m, spacing between roofspars = 0.6m


21 uH coil, 54% from feedpoint (21 turns on Amidon T200-2)
to fit 40/15m dopole in roofspace (15m)


Detail of end-isolator with wires folded back and twisted
for fine tuning the dipoles for the lower frequencies


Detail of end-isolator with clamp for fine tuning the dipoles for the higher frequencies


SWR-Plot (EZNEC Simulation)


Real SWR-Values (CIA Antenna Analizer)

 

EZNEC Data-File for 20m - 10m Dipole 20M-10M-PARALLEL-DIP.EZ

EZNEC Software (Demoversion with slightly limited Functions)

Short Manual for EZNEC Software (german)

Back