All about Rope
Home > HF Contesting > Tips and Techniques > All about Rope
• This page compares different types of rope, and explains how their properties affect their useage.
The following article was written by Dr.Barry L. Ornitz WA4VZQ, a PhD chemical engineer who has worked for several manufactur-ers of plastics and chemicals, has quite a bit of experience with the physical and chemical properties of plastics, and is familiar with the chemical and ultraviolet resistance of polymers.

Polypropylene rope is most commonly used here in the States as "ski rope." It is inexpensive, light weight, strong and it floats. But the polymer structure of polypropylene (and most other polyolefins like polyethylene, etc.) is not resistant to ultraviolet. When exposed to sunlight, it quickly degrades from the ultraviolet radiation. The result is considerable weakening of the rope along with surface oxidation. The loss of tensile strength is naturally a bad thing for a guying application. The surface oxidation is of not much concern here, but when used as an insulator (such as on the ends of a wire dipole), the oxidized surface becomes wettable allowing surface contamination to adhere. This can increase the RF losses of the rope slightly. If you observe polypropylene rope after a season or two outdoors, you can visibly see the surface degradation and you can often seen numerous broken strands.

To slow the degradation of polypropylene rope, or any plastic for that matter, anti-oxidants and ultraviolet inhibitors may be added. These increase the life of the rope somewhat, but they do not offer ever-lasting protection. Certain colors offer better ultraviolet protection too. I am sure that most people are familiar with the fact that organic dyes and pigments fade. Red is probably the worst offender, followed by yellow. Bright white and black generally hold up the best. In polypropylene rope, the black will generally do better than the white. Since the polypropylene is naturally translucent, it takes little white pigment (usually titanium dioxide) to make it white. Black is cheaply obtained by adding carbon black to the polymer melt. The white pigment tends to reflect the ultraviolet while the carbon black tends to absorb it and convert it to heat. With its low pigment loading, black polypropylene is probably better than the white.

A much better choice is nylon rope. It is strong, readily available, and has a fairly high ultraviolet resistance. It does stretch considerably, and this is an important consideration in antenna work. Chemically, the nylons are in a family known as polyamides. Their chemical resistance is normally good except in areas where acid conditions exist. These tend to occur in industrial areas with high smog or where acid rain is prevalent. Again bright white or solid black is to be preferred in outdoor use.

Probably the best rope materials for outdoor use are the polyesters. Typically these are polyethylene terephthalate (PET) or polybutylene terephthalate (PBT), although I suppose polyethylene naphthalate (PEN) ropes exist today. The most common material is PET [more properly called poly(ethylene terephthalate)], known under such trade names as Dacron (DuPont), Fortrel (Wellman), Kodel (Eastman), A.C.E. (Honeywell). etc. [For some reason, rope vendors at many USA hamfests tend to charge a premium for Dacron, probably because of the name recognition.]

Polyester ropes have very low stretch making them excellent for guying applications. They are excellent in both chemical and ultraviolet resistance. The polyester materials have an interesting property that makes them especially ultraviolet resistant. These materials fluoresce upon exposure to ultraviolet light; they absorb ultraviolet radiation and re-emit it as light at a longer wavelength. Generally the emission is in the near-infrared region but some materials fluoresce in the visible spectrum too. This is an effective way of getting rid of the energy absorbed from the ultraviolet and it provides much of the ultraviolet resistance seen in these materials. Their chemical resistance is even better than the nylons. Black or white colors are still to be preferred, although I have seen surplus military rope in the traditional olive-drab color that should perform well. Since the polyesters are generally clear, they take more white pigment to color them than to the polypropylene materials. Thus the white rope is almost as good as black for long-term use.

There are other specialty ropes available such as those made from polyaramides (Kevlar and Nomex by DuPont) and polyimides. The Kevlar ropes are extremely strong, but they require special stranding and covering to avoid abrasion problems; their abrasion resistance is quite poor. There are also composite ropes made with a core of one material which is clad with a woven covering. These tend to be rather specialized and are probably not worth much discussion. However there are polyester covered polypropylene ropes on the market today. These rely on the good strength of the inexpensive polypropylene core, while the jacket provides considerable protection of the core from sunlight. Wire ropes are also commonly available, and entire books have been written on their design and application. It is usually best to consult the manufacturers directly about applications of these specialty ropes.

I hope this gives a better explanation of why you might not want to use polypropylene in many applications. However, I do like to use polypropylene ropes for Field Day antennas. These are used only a few days each year, and the bright colors can provide contrast to prevent people from walking into them! They are inexpensive enough to discard too.

 
web design by www.abacus-design.net --- Irish and international copyright © 2000, 2001