Titre: MFJ-1278 doble firmware. From: EB1FEF@EA1URA.EAO.ESP.EU To : EPROM@EA EB1FEF@EA1URA.EAO.ESP.EU [OVIEDO] TPK 1.82 Msg #:2731 Fecha: 29/03/95 Si eres suario de la MFJ-1278, puedes disponer de doble firmware en tu tnc, con tu TAPR normal y TF-2.6 adaptado a la MFJ-1278 gracias al colega que firma el DOC de este firmware en el doc que sigue: ------------------------------------------------------------------- ISTRUCTIONS FOR USE PATCHED WA8DED HOSTMODE FIRMWARE VER 2.6 WITH MFJ 1278 dULTIMODE TNC 1) This is only a PATCH to WA8DED firmware for using it with MFJ 1278 TNCs the code is still copyrighted by Ronald E. Raikes. 2) You can program this code on a 27C256 EPROM but in such case you must left PIN 1 of the IC OUT OF THE SOKET and wire it to +5 Volts (PIN 28 of the EPROM). If You use a 27C512 program the code IN THE SECOND HALF OF THE EPROM (starting from address 8000H). 3) Remove the original EPROM at position U23 and install the WA8DED patched one, the MFJ 1278 will respond you as a TNC2 at 9600 BAUD. To work at 4800 BAUD Patch 61B6:48 61C6:08 4) With this FIRMWARE you will lose the multi mode capabilty of MFJ 1278, it is intended to allow you to enjoy programs like SP in true HOST MODE. 5) The followings new commands are available: @R0 (Default) Select RADIO 1 port @R1 Select RADIO 2 port @A0 (Default) Select VHF PACKET modem @A1 Select HF PACKET modem @X0 (Dfault) Select 1200 BAUD VHF PACKET modem @X1 Select 2400 BAUD VHF PACKET modem (MFJ TURBO ONLY) @J Put the tnc in KISS MODE (I used the EFKISS code wich seems to have no problems. (The kiss of MFJ 1278 ver. 3.4 has some bugs still). 73 DE IK1SHJ@I1HUH.#GE.ITA.EU JN44LJ GENOVA. Mail add: Giovanni Bini Via Turati 4/10 16128 Genova ITALY -------------------------------------------------------------------- A este firmware te puedo sumar: MFJ ENTERPRISES INC MODEL NO. MFJ-1278 MULTIMODE DATA CONTROLLER AX.25 Level 2 Version 2.0 + BLP 1.0 Release 3.6 09/30/92 - 32K RAM Multilevel O bien: MFJ ENTERPRISES INC MODEL NO. MFJ-1278 MULTIMODE DATA CONTROLLER AX.25 Level 2 Version 2.0 + BLP 1.0 Release 3.6 12/23/92 - 32K RAM Multilevel Tambien te puedo a¤adir el firware que tu uses en tu tnc habitualmente. Para ello solo es necesario una memoria 27C010 y un commutador de palanca de un circuito, dos posiciones. Envˇa la memoria en un sobre acolchado y pinchada en una tablilla de forexpan, junto con la llave conmutadora y el franqueo necesario para su devoluci˘n. Recibiras la memoria praparada para insertar en el z˘calo. Solo necesitaras hacer un taladro en el frontal de la tnc para poner la llave commutadora. Mi direccion es: Juan Carlos Amor Abellan Independencia,22 5§-C 33004 - Oviedo ASTURIAS Si tienes alguna duda, puedes llamarme al 95 - 524 03 09 de 22:15 a 00:00 horas. Y manda el TFPCR y TFPCX al caj˘n de los recuerdos !!! P.D. No cobro nada de nada, mi inter‚s es s˘lo el de ayudar si puedo. 73 de Juan Carlos.