call |
required
|
station
callsign
-
striking the <enter> key is equivalent to
clicking the Lookup button
-
striking CTRL-<enter> is equivalent
to clicking the Log button
-
striking the ESC key or clicking on the ?
button to the left of this field filters the Log Page Display for
previous QSOs with this station
-
striking the INS key is equivalent to clicking
the Start button
-
keyboard shortcuts navigate
to other Capture Window items
-
the label of this field indicates the number of
previous QSOs after the Log Page Display has been filtered for
previous QSOs
-
clicking on the label of this field will
display the main log window, should it be minimized
|
RST sent |
optional
|
signal report
sent
-
if the run-mode
box is checked, clicking the Lookup button initializes
this field to 59 (if the mode is SSB or FM) or to 599 (if the mode
is CW, RTTY, or PSK)
-
striking CTRL-<enter> is equivalent
to clicking the Log button
-
keyboard shortcuts navigate
to other Capture Window items
|
RST rcvd |
optional
|
signal report
received
-
if the run-mode
box is checked, clicking the Lookup button initializes
this field to 59 (if the mode is SSB or FM) or to 599 (if the mode
is CW, RTTY, or PSK)
-
if the Set QSO start when RST Rcvd
box is checked, entering a received signal report
-
designates the the QSO start time
-
hides the Start button until the QSO is logged
or cleared
-
displays the QSO start time
-
striking CTRL-<enter> is equivalent
to clicking the Log button
-
keyboard shortcuts navigate
to other Capture Window items
|
name |
optional
|
operator's
name
|
QTH |
optional
|
station QTH
|
QSL requested |
optional
|
check if the
operator asked you to QSL (initial value is set by the Preset 'QSL Requested' checkbox)
|
QSL via |
optional
|
QSL route
-
striking CTRL-<enter> is equivalent
to clicking the Log button
-
keyboard shortcuts navigate
to other Capture Window items
-
double-clicking invokes the Address
Editor
|
frequency |
optional
|
frequency in
mHz
-
if Commander is running, clicking the Lookup button or
clicking the ? button to the left of this field initializes the
field to your transceiver's current frequency
-
if Commander is not running running, clicking the Lookup
button or clicking the ? button to the left of this field
initializes the field to its value in the previously-logged QSO
-
striking CTRL-<enter> is equivalent
to clicking the Log button
-
keyboard shortcuts navigate
to other Capture Window items
|
mode |
optional
|
mode
-
if CI-V
Commander is running, clicking the Lookup button or
clicking the ? button to the left of this field initializes the
field to your transceiver's current mode
-
if CI-V
Commander is not running running, clicking the Lookup
button or clicking the ? button to the left of this field
initializes the field to its value in the previously-logged QSO
-
striking CTRL-<enter> is equivalent
to clicking the Log button
-
keyboard shortcuts navigate
to other Capture Window items
|
notes |
optional
|
QSO notes
-
if this item is not visible, strike the ~
button to the left of the QSL msg selector
-
striking CTRL-<enter> is equivalent
to clicking the Log button
-
keyboard shortcuts navigate
to other Capture Window items
-
double-clicking invokes the Field Editor
|
QSL msg |
optional
|
QSL message
selector
-
if this item is not visible, strike the ~
button to the left of the notes item
-
striking CTRL-<enter> is equivalent
to clicking the Log button
-
keyboard shortcuts navigate
to other Capture Window items
|
DXCC |
required
|
DXCC prefix
-
clicking the Lookup button or clicking
the ? button to the left of this field chooses the DXCC prefix
associated with the Callsign
-
striking CTRL-<enter> is equivalent
to clicking the Log button
-
keyboard shortcuts navigate
to other Capture Window items
|
state |
optional
|
US state
|
county |
optional
|
county
|
province |
optional
|
Canadian
province
|
IOTA |
optional
|
Islands on
the Air designator
|
gridsquare |
optional
|
Maidenhead
grid square
|
pwr |
optional
|
transmit power (watts)
-
double-clicking sets the
the Default Transmit Power to the power specified in this field
-
striking
SHIFT-<enter> sets the the Default Transmit Power to the power
specified in this field
-
striking CTRL-<enter> is equivalent
to clicking the Log button
-
keyboard shortcuts navigate
to other Capture Window items
|
CQ |
optional
|
CQ zone
|
ITU |
optional
|
ITU zone
|
myQTH |
optional
|
unique QTH
identifier
-
clicking the Lookup button or
clicking the ? button to the left of this field initializes the
field to the contents of the my
QTH ID textbox on the Defaults panel of the Config window's
General tab
-
striking CTRL-<enter> is equivalent
to clicking the Log button
-
keyboard shortcuts navigate
to other Capture Window items
|
contest |
optional
|
contest
identifier
|
tx# |
optional
|
transmitted
sequence number
-
automatically increments after each QSO if
Contest is not blank
-
striking CTRL-<enter> is equivalent
to clicking the Log button
-
keyboard shortcuts navigate
to other Capture Window items
|
rx# |
optional
|
received
sequence number
|