Voice announcements
FT100-SuperControl� is able to do voice announcements when using several functions in the software. Generally wave-files (.wav) are used by the software which can be altered by the users, if needed. Maybe you wish to hear your wife speaking, or simply you want to translate it to other languages. You can find these wave-files in your FT100-SuperControl� application path, where you should find a drawer called "sound". All the following files you can find there.
As of version 1.0.1, the following wave-files will be of use:
Used filename |
Will be activated with button/function |
0.wav |
frequency change |
1.wav 2.wav 3.wav 4.wav 5.wav 6.wav 7.wav 8.wav 9.wav punkt.wav khz.wav mhz.wav ok.wav
am.wav cw.wav fm.wav lsb.wav usb.wav
ars0.wav ars1.wav
cat0.wav cat1.wav
clone.wav
cluster.wav
cross0.wav cross1.wav
dec0.wav dec1.wav
dcs0.wav dcs1.wav
doppler.wav
enc0.wav enc1.wav
enter1.wav enter2.wav
exit.wav
fast.wav
logbook.wav
nmem.wav mem1.wav mem2.wav mem3.wav mem4.wav
smem.wav smem1.wav smem2.wav smem3.wav smem4.wav
memscan.wav
nor.wav
prio0.wav prio1.wav
qrgscope.wav
reset.wav
rev.wav
rpt0.wav rpt1.wav
sat0.wav sat1.wav
skedbook.wav
slow.wav
spectrum0.wav spectrum1.wav
tckn.wav tckr.wav tckoff.wav
tips0.wav tips1.wav
trans0.wav trans1.wav
tx0.wav tx1.wav
vfoscan.wav
voiceid.wav
wave.wav
writebc.wav writebeac.wav writecross.wav writehf.wav writelog.wav writemem.wav writesat.wav writesked.wav writespec.wav writespec.wav writespec.wav writespec.wav writerep.wav writevhf.wav
|
frequency change frequency change frequency change frequency change frequency change frequency change frequency change frequency change frequency change frequency change frequency change frequency change frequency change
Mode change AM Mode change CW Mode change FM Mode change LSB Mode change USB
ARS OFF ARS ON
CAT OFF CAT ON
CLONE
DXCLUST
CROSS OFF CROSS ON
DECoff DEC
DCSoff DCS
DOPPLER
ENCoff ENC
ENTER VFO1 ENTER VFO2
EXIT PROGRAM
FAST
LOG
MEM-N MEM-2 MEM-3 MEM-4
MEM-S MEM-S1 MEM-S2 MEM-S3 MEM-S4
MEMscan
NOR
PRIO OFF PRIO ON
QRG-SCOPE
RESET
REV
RPToff RPT
SAT OFF SAT ON
SKED
SLOW
AF-OSC OFF AF-OSC ON
TCK-N TCK-R TCKoff
TIPS OFF TIPS ON
TRANS OFF TRANS ON
TX on TX off
VFOscan
VOICE ID
WAV REC
BC write Beac write CROSS write HF write Log write Mem write SAT write SKED write S1-write S2-write S3-write S4-write REP write VHF write |
If you wish, you can record again these files with your own voice. You can use the Windows audiorecorder program to do that (refer to picture 1.1). Of course you'll need a soundcard and a computer based microphone to record wave files !
(picture 1.1 - The Windows audiorecorder)
If you have recorded your own set, it would be great if you can share it with the users of FT100-SuperControl�, if it is of need. Of course we need sets of all the available languages. Of course your set will be placed to the download area of the FT100-SuperControl� homepage. Please write an e-mail to [email protected], if you have any questions. Thank you.