Foreword

After the first project FT847-SuperControl, i unconditionaly wanted to develop a software for other transceivers as well. I never thought that FT847-SuperControl would become that successful and famous. Due to the continuous great feedback from all the users, i had a commitment to begin with another project: FT100-SuperControl.

FT100-SuperControl� is also a production solely coded in my spare time. Of course the software will be continuously updated and hopefully FT100-SuperControl will become as successful and famous like FT847-SuperControl.

Program Features:

• Full transceiver control via buttons in the software. Frequency, mode and other important indications will be polled automatically from the transceiver. So a normal tuning on the transceiver itself will be detected and shown in the software VFOs
   

• Open memory database with an unlimited amount of possible memories in an overall view. The memory banks of all amateur radio bands are visible and useable with ease at the same time. Several additional memory banks are available. Also memory banks with the possibility to save offset, DCS, DEC, ENC and AZ/EL-data are available. The AZ/EL-data can be sent directly to the ARS rotator interface or to another serial port to drive Easycomm-compatible hardware like rotators and much more
   

• All possible meter bars are visible at the same time (s-meter, power-meter, reflected power (SWR) ALC-level-meter, Microphone-level-meter, temperature-meter for the finals, squelch-status meter, etc.)
   

• Special clarifier decoding. The clarifier offset and the final clarifier frequency will be shown in additional VFO-displays
   

• Support of up to eight different serial ports. These ports are to be used when converting a USB-port to a serial-port. Many of the converting software's will take COM5 for the first converted USB to serial port
   

• Configurable home-channels for each amateur radio band
   

• Logbook - function
   

• Skedbook - function
   

• Wave recording of QSOs or other important signals. FT100-SuperControl� has the possibility to record signals either when the squelch has been opened or on other selectable events. For this feature, a standard sound-card in the computer is necessary. The recorded data will be saved automatically to a special drawer and can be replayed at any time
   

• Internet based telnet DX-cluster logger shows the latest DX-spots in the VFO-display of the software
   

• Spectrum scope of AF (Audio frequency)
   

• Testing environment for undocumented CAT commands
   

• Full support for the ARS rotator interface via DDE
  

• Full support for the Easycomm rotator interface via a second serial port
   

• More features soon !