To control the link between the repeaters, enter the following commands on the 145.460 repeater: enter 11* to link the repeaters and 10* to delink the repeaters. If you forget to delink the repeaters, the link will time out in a few minutes. These link commands (11* and 10*) are public for use by all amateurs -- feel free to give them to any amateur.
The repeater requires a CTCSS tone of 107.2 Hz for access. The repeater transmits a CTCSS tone of 107.2 Hz. You can program your radio to only receive signals with the tone to prevent reception of noise and intermod.
The repeater is comprised of a General Electric Master II repeater, an S-COM 7K controller, a Decibel Products duplexer, and a 9-db antenna mounted 50-feet up a tower with a directional pattern aimed east.
The repeater requires a CTCSS tone of 107.2 Hz for access. The repeater transmits a CTCSS tone of 107.2 Hz. You can program your radio to only receive signals with the tone to prevent reception of noise and intermod.
This repeater is comprised of a General Electric Master II repeater, S-COM 7K controller, a Decibel Products duplexer and a 6-db antenna mounted 50-feet up a tower with a directional pattern aimed east.