Commander: Changing Mode and Filter Setting

Commander Online Help Contents

Buttons representing the modes supporting by your radio appear in the Main window's Mode panel, and identify the radio's current mode. To change your radio's mode, click the appropriate button in the Mode panel.

If your radio supports Filter Groups and the restore Filter Group on mode change box is checked,  the caption on each mode button will indicate the last Filter Group used in that mode. In this case, clicking a mode button both directs your radio to change mode, and establishes receiver bandwidth settings specified by that Filter Group. 

LSB selects lower sideband modulation
USB selects upper sideband modulation
CW selects continuous wave
CW-R selects continuous wave, reversed
RTTY selects radioteletype
RTTY-R selects radioteletype, reversed
FM selects frequency modulation
WBFM select wide-band frequency modulation
AM selects amplitude frequency modulation
PKT selects packet