回到主页 |
Amateur Base Transceivers | |||||||||||||||||||||||||||||||||||||
The ICOM IC-746 Pro covers 160-10 meters plus 6 and 2 meters. 100 Watts of output is available on all bands - HF, 50 MHz and 144 MHz, making the IC-746 a practical choice for all-around base station use. The die-cast aluminum chassis and a large cooling fan help to stabilize the PA circuit, providing 100% full duty cycle operation. The new Pro version features 32 bit floating point DSP and 24-bit AD/DA converter. This combination dramatically improves receiver performance providing ultra wide dynamic range and good third order intercept point. An there are NO more expensive optional filters to buy. The digital IF filter allows your to select 51 filter bandwidths. Soft and sharp filter shapes can be selected in both SSB and CW modes independently. You can also change the settings on the fly and compare! There is even a built-in Baudot RTTY demodulator. It has 100 alphanumeric memories, digital RF speech compression, spectrum
display, digital Twin PBT, Noise Blanker, CTCSS encode/decode, APF, two
stage preamp, automatic antenna tuner and electronic keyer. A built-in
automatic antenna tuner operates on the HF bands plus 6 meters. The 746
Pro requires 12 VDC at 23 amps. The IC-746 Pro comes with HM-36 hand mic,
spare fuses, DC power cable and key plug. 11.3x4.8x12.5 inches. 20 Lbs.
|