The eastern side of my basement shack:
The bottom table, left to right: homebrew triple 30 regenerative receiver, Hallicrafters HT44, Power supply for HT44, Hallicrafters SX117.
Small table at far right: RAL-7 Navy regenerative receiver; on top of RAL-7, left side, is an ARC-5 command set; to the right of the ARC-5 is a BC221 frequency meter. Below the RAL-7 are the power supplies for the RAL-7 and ARC-5.
Upper shelf, left to right: WRL 755A VFO, WRL Globe Chief 90; next to the Chief is my "floater" rig, usually a breadboard transmitter or whatever I am experimenting with at the time- in this photo, it is my triple 2A5 MOPA rig; next to the MOPA rig is my simple inductive antenna coupler, and next to that is conventional tuner.
The western side of my basement shack:
On the desk, left to right: Hallicrafters SX101A, Hammarlund HQ140X, RME DB22A preselector; On top of SX101A is an HT37 transmitter; on top of the HQ140X is a Heathkit Q-multiplier
The eastern side again after I re-arranged things:
The TCS-12 Navy transmitter is sitting on the small table against the wall, with the ARC-5 command set to its left. The BIG shelves hold a National NC100ASD receiver, BC1306 receiver and homebrew regen on top shelf, the RAL-7 and its power supply and BC221 freq meter on the next lower shelf, and the RMCA AR8507 LF receiver on the shelf below the RAL7.