First, a mod for an external SMA connector, more useful than a chocolate hammer... Careful soldering of this semi-rigid coax, by using a multi-meter I was able to determine where the center and out coax were to go (below)
Hey this is easy! hang on, you aint put the other half back yet! AND there something you have forgot Alan! ? ohhh.. the LED you can see, theres a molding to go over them on the other half, make some space or leave some space for it!
The finnished job, this one with a 500Mw booster..
And this one below, without booster, just with standard 3db antenna
Not done with the homehub yet!
Did you know you can use a USB memory stick on the homehub?
I was able to plug in my CARD READER (multiport) and access my CompactFlash card in the reader, plugged into the USB A port.
Going to "My Computer" or Windows explorer, and pointing to your Network, you should see a new neigbourhood called Bt, inside this should be a place called
Samba Server (Thomson) Open that folder to explore what will be available on the network to all connected machines.
BE WARNED THOUGH...
This isnt documented and it YOUR fault if anything goes wrong !
Do it at YOUR OWN RISK
